NEWS

NEWS CENTER


Focusing on cutting-edge industry trends and corporate technological innovation, we provide you with timely and effective information from a professional perspective.

Precautions for Operating the Emulsifier

Release Time:2026-01-23 15:01:12 19

After the emulsifier is placed in the customer's production workshop, actual production can begin. Before using the emulsifier, we must first understand the relevant precautions to prevent human-caused accidents. We can check them one by one from the following aspects, and only after the completion of all checks can the next stage of production be carried out.

First of all, connect the power supply. The ground wire of the emulsifier must be reliably connected to ensure electrical safety protection; otherwise, accidents are likely to occur.

After the power is connected, we need to jog the homogenizing head of the emulsifier to check its rotation direction. Viewed from the top, a counterclockwise rotation indicates correct wiring, while a clockwise rotation means reverse wiring, and the power supply should be reconnected in such a case.

No dry running of the emulsifier's homogenizing head is allowed without any medium, to prevent overheating that may burn out the bearings and cause deformation of the sealing parts.

For vacuuming operation, the water tank of the vacuum pump must be filled with water first to avoid dry running of the pump. When starting the vacuum pump for the first time, check the airtightness of all vacuum pipelines to prevent air leakage and insufficient vacuum degree.

Before turning off the vacuum pump, close the ball valve in front of it first to avoid air leakage. When the pot cover needs to be lifted, open the air filter first to restore the normal pressure inside the pot, and then perform the lifting operation.

Do not turn on the vacuum pump when the pot cover is not sealed. In case of special circumstances, the continuous running time after startup shall not exceed three minutes to prevent equipment damage.

When the materials need to be heated, ensure that there is a heating medium in the jacket of the emulsifier first to prevent dry heating and damage to the heating tubes.

If abnormal noise occurs during the operation of the emulsifier, cut off the power supply immediately and do not reuse the equipment until the cause is identified and resolved.

During the operation of the emulsifier, it is forbidden to put any part of the body into the pot to prevent accidents.

When cleaning the emulsifier, cut off all power supplies before starting the cleaning work to avoid accidents.

Phone: +86-13386259279 (WeChat: same as above)

Contact Person: Mr. Cao

Email: 138237521@qq.com

Email: sunway@ntsanhuai.com

Website: www.ntsanhuai.com

Add: 101, Building 20, Area B, Helian Juxing Industrial Park,
No. 28, Guyan Road, Nantong City

Scan to follow us

Copyright © 2025 Nantong Tongzhou Sunway Machinery Manufacturing Co., Ltd.  All Right Reserved.  Jiangsu ICP Filing No. 2020065308-2

Technical Support: SUEASY

HOME
PRODUCTS
JOIN
CONTACT