NEWS CENTER
Focusing on cutting-edge industry trends and corporate technological innovation, we provide you with timely and effective information from a professional perspective.
What is an emulsifier used for?
Emulsifying Machine - Introduction, Working Principle, Structure, Functions & Installation Notes
It refers to professional equipment for high-speed shearing, dispersing and mixing of materials. It is mainly used in processes such as stirring, homogenizing, mixing and dispersing of fluid materials. A powerful shearing force is generated during the high-speed relative rotation of the spindle and rotor, enabling full mixing and crushing of materials! Air bubbles are removed in a vacuum during the mixing process.
Working Principle
Materials are first preheated and stirred in the water and oil kettles, then directly sucked into the homogenizing kettle in a vacuum state through the delivery pipeline. In the homogenizing kettle, the upper scraper of the kettle stirrer (the scraper always fits the kettle shape and cleans off wall-adhered materials) continuously creates new interfaces. The materials are then sheared, compressed and folded by the frame stirrer and its reverse stirring blades, making them stir and mix before moving down to the homogenizer at the bottom of the kettle. Through processes such as shearing, impact and turbulent flow generated between the high-speed rotating rotor and stator, the materials are cut in the shear gap and rapidly crushed into particles of 200nm~2μm. Micronization, mixing, blending and dispersion of materials can be completed in a short time. Since the homogenizing kettle is in a vacuum state, air bubbles generated during material stirring are extracted in a timely manner. After homogenization, lift the kettle cover, and press the tilting button switch to discharge the materials in the kettle into an external container (or open the bottom valve and pressure valve for direct discharge). The heating temperature of the homogenizing kettle is displayed by the temperature controller on the control panel; homogenizing stirring and paddle stirring can be used independently or simultaneously. The duration of homogenizing stirring is controlled by the user according to the material properties and can be adjusted through the control panel. After operation, the cleaning ball valve can be opened to clean the kettle body.
Structural Composition
It consists of a main kettle, an oil kettle, a water kettle, an electrical control system, a hydraulic system, a vacuum system and a frame, etc.
The main kettle is composed of a homogenizing stirring kettle, a homogenizing mechanism, a bidirectional stirring mechanism, etc.
Equipment Functions
The top of the main kettle is equipped with a liquid inlet for adding trace elements; the water and oil kettles are semi-open for convenient feeding.
The main kettle features a vacuum feeding function.
The frame stirrer and blade stirrer run in reverse directions with frequency conversion speed regulation; the frame stirrer is equipped with a scraper for stirring without dead corners.
Adopts imported-technology high-shear homogenizer with top-mounted homogenizing structure.
The bottom of the main kettle is equipped with a bottom valve with positive pressure discharge function and no dead corners.
Both the homogenizing kettle and premixing kettles are triple-layer structured with built-in jackets, which can realize heating or cooling by passing water through the jackets.
The kettle cover of the main kettle has a hydraulic lifting function, and the kettle body is designed to be tiltable for easy internal cleaning.
The control panel is equipped with on, off and emergency stop switches, with setting and display functions for upper and lower temperature limits; it can control and set stirring speed (frequency conversion speed regulation), homogenizing speed and homogenizing time, and also integrates the control of vacuum, lighting, all functions of the premixing kettles as well as the lifting of the hydraulic system.
The main kettle cover is equipped with an illuminating lamp and a wiper mirror for easy observation of the internal state of the kettle.
An emergency stop function is additionally provided.
Installation and Commissioning Notes
Connect the power supply matching the rated voltage, ensure reliable earthing of the ground wire, and turn on the main power switch;
the power indicator light will be on. (After motor wiring or restarting after long-term inactivity, perform inching test run; the frame stirrer rotates counterclockwise when viewed from the top. During commissioning, conduct inching test run of the stirrer first, and start the homogenizer only after confirming no abnormalities!)
Correctly connect all pipelines of the homogenizing kettle (including all overflow outlets, water discharge outlets, sewage outlets, etc.).
Before vacuum operation, check that the kettle body is closely attached to the kettle cover, and all kettle openings and material inlet covers are tightly closed with reliable sealing. Close all valve interfaces on the kettle cover, then open the vacuum valve on the kettle cover and start the vacuum pump for vacuuming; turn off the vacuum pump and the vacuum valve simultaneously after reaching the required vacuum degree. (See the operation process flow chart for details)
Homogenizing cutting and scraper stirring: After feeding (water can be used as a substitute during commissioning), turn on the corresponding control switches separately to control the operation of the homogenizer and the scraper stirrer. Perform inching before starting the stirrer to check for abnormalities in the wall-scraping process, and eliminate any abnormalities immediately if found.
The vacuum pump can only be started when the homogenizing kettle is well sealed. If it is necessary to start the pump with open atmosphere for special reasons, the continuous operation time shall not exceed 3 minutes.
It is strictly forbidden to run the vacuum pump without working fluid, and to block the exhaust port during pump operation.
Regularly check the lubricating oil and grease in all components and bearings, and replace them with clean ones in a timely manner.
Keep the homogenizer clean. Clean the parts of the homogenizer in contact with the working fluid every time before stopping use or replacing materials, especially the cutting wheel, cutting sleeve at its head, and the sliding bearing and shaft sleeve inside the homogenizing shaft sleeve. After cleaning and reassembly, the impeller should rotate manually without jamming; after the flanges of the kettle body and kettle cover are relatively fixed, perform inching test run of the homogenizer motor to confirm correct rotation direction and no other abnormalities before formal startup.
The cleaning of all kettles shall be handled by the user in accordance with relevant standards.

Phone: +86-13386259279 (WeChat: same as above)
Contact Person: Mr. Cao
Email: 138237521@qq.com
Email: sunway@ntsanhuai.com
Website: www.ntsanhuai.com
Add: 101, Building 20, Area B, Helian Juxing Industrial Park,
No. 28, Guyan Road, Nantong City
Scan to follow us
Copyright © 2025 Nantong Tongzhou Sunway Machinery Manufacturing Co., Ltd. All Right Reserved. Jiangsu ICP Filing No. 2020065308-2
Technical Support: SUEASY